Stetter batching plants from 18 to 56 m³ per hour, installed by MACC
Compact and mobile plants that weigh every batch, configured for Philippine power and supported after handover.
Accurate batching, reliable output
Stetter batching plants weigh and mix aggregates, cement, water and admixtures precisely, batch after batch. The range runs from compact plants for project sites, such as the CP 18, to mobile plants for ready-mix producers.
MACC supports you from plant selection and layout through installation, commissioning and after-sales service.
- Compact plants for project sites
- Mobile plants that move between projects
- Automated controls for accurate, repeatable batching
- Installation, commissioning and after-sales support
Models available in the Philippines
Plants are configured for the Philippine power supply (440 V, 60 Hz). Aggregates, cement and water are all batched by weight.
Batching plants
| Model | Output | Mixer | Batch size (compacted concrete) | Max. grain size | Cement / water weighing |
|---|---|---|---|---|---|
| CP 18 | 18 m³/hr | Pan | 0.35 m³ | 40 mm | 200 / 100 kg |
| M25-Z | 24.8 m³/hr | Pan | 0.4 m³ | 40 mm | 240 / 120 kg |
| M30-Z | 30 m³/hr | Pan | 0.5 m³ | 40 mm | 300 / 150 kg |
| M45-Z | 42.1 m³/hr | Pan | 0.75 m³ | 40 mm | 450 / 225 kg |
| M1 C | 56 m³/hr | Pan | 1.0 m³ | 45 mm | 750 / 375 kg |
| M1 T | 55 m³/hr | Twin shaft | 1.0 m³ | 63 mm | 750 / 375 kg |
The CP 18 is a compact plant that travels on a single truck, needs few components assembled on site, and discharges directly into a pump or transit mixer. It stores four aggregates (6 m³, or up to 20 m³ with optional extension panels) and weighs up to 875 kg of aggregate per batch.
The M-series are mobile plants built as pre-assembled units: they travel on a trailer, need only a mobile crane to erect, and can be moved between projects. A skid base is optional. The M30-Z and M45-Z take four aggregates in a compartment batcher (18 and 20 m³); the M1 holds 40 m³ in compartments or 50 m³ with an in-line silo. Ice and powder weighers are optional on the M30-Z, M45-Z and M1.
Concrete recycling: turn returned concrete back into aggregate
Returned and leftover concrete does not have to be waste. The RA 12 recycling plant washes it out, and the sand screener that works with it recovers the aggregates and sand with a rotating trommel screen, ready to go back into production.
- Runs automatically from the RA 12 control system, with no separate operator
- Recovered aggregates and sand can be reused in batching
- Low running cost, quiet operation and easy cleaning
- Screen size can be adapted to the plant and material
The sand screener for the RA 12: a 1 m x 2 m trommel that separates sand from aggregate.
| Model | Washing capacity | Flushing water | Drum water capacity | Connected load |
|---|---|---|---|---|
| RA 12 recycling plant | 12 m³/hr | 7 to 12 m³/hr (adjustable) | 2 m³ | 10.16 kW |
| Model | Output | Trommel screen (dia. x length) | Screen speed | Screen cut size | Max. aggregate size | Drive motor | Footprint |
|---|---|---|---|---|---|---|---|
| Sand screener (for RA 12) | 12 m³/hr | 1 m x 2 m | 21 rpm | 5 mm | 40 mm | 2.2 kW | 3.3 x 1.4 m |
Watch the sand screener at work
Figures are manufacturer data for the standard configuration and may vary with options. Contact us for the full data sheet of any model.
Built for
- Ready-mix concrete producers
- Large infrastructure and building projects
- Precast and concrete product manufacturers
- Contractors producing concrete on site
Planning a new plant or an upgrade?
Tell us your target output, site and materials, and we will propose a plant configuration and send a quotation.