A contractor that buys ready-mix depends on someone else for the most time-sensitive material on the project. A compact batching plant on site removes that dependence.
What the CP 18 produces
The Stetter CP 18 produces 18 m³ of concrete an hour, in batches of compacted concrete from a pan mixer. It comes in two versions: the CP 18 C3 batches 0.30 m³ at a time and the CP 18 TM batches 0.35 m³. The batch size can be set from 0.1 m³, so small pours do not waste material.
| CP 18 version | C3 | TM |
|---|---|---|
| Batch size | 0.30 m³ | 0.35 m³ |
| Aggregate scale | 700 kg | 875 kg |
| Cement scale | 180 kg | 200 kg |
| Water scale | 90 kg | 100 kg |
| Discharge height | 2.01 m | 4.02 m |
| Aggregate storage | 6 m³, or 16 m³ with extension panels | 6 m³, or 20 m³ with extension panels |
| Discharges into | A concrete pump | A transit mixer |
From stockpile to pour in four steps
- StoreFour aggregates, 6 m³ in total. Optional extension panels raise that to 16 m³ on the C3 or 20 m³ on the TM.
- WeighAggregates, cement and water are all batched by weight. Up to 700 kg of aggregate per batch on the C3 and 875 kg on the TM.
- MixA pan mixer works each batch. The control corrects the water for aggregate moisture.
- DischargeThe C3 discharges at 2.01 m, straight into a concrete pump. The TM discharges at 4.02 m, high enough to load a transit mixer.
What it takes to set up
- It travels on a single truck and needs few components assembled on site.
- It can be built for the Philippine 60 Hz supply. Tell us the voltage and frequency at your site when you ask for a quotation.
- The control has a touch display, with manual and automatic modes.
Clearance under the mixer
Plan what the plant will discharge into before it is positioned, because that decides how high it has to sit.
- Into a concrete pump. Standing on level ground, the CP 18 discharges at a height that suits the hopper of a stationary pump. This is the simplest setup.
- Into a standard transit mixer. A transit mixer is taller than a pump hopper. The plant is either raised on concrete pedestals, as in the photos below, or the truck stands in a bay dug out below the mixer.
Where it fits
- A contractor with steady concrete demand on its own projects
- Sites far from a ready-mix plant
- Projects that move from one location to the next
- Work that needs concrete on the contractor's schedule, not the supplier's
If your projects need more volume
| Plant | Type | Output | Batch size |
|---|---|---|---|
| CP 18 | Compact | 18 m³/hr | 0.30 or 0.35 m³ |
| CP 30 | Compact | 30 m³/hr | 0.5 m³ |
| M1 | Mobile | about 56 m³/hr | 1.0 m³ |
| M 2.5 | Mobile | 112 m³/hr | Ask us |
Planning to batch your own concrete?
Tell us your target output, site and materials.