Every transit mixer needs something to turn the drum. On a Stetter mixer you choose between two arrangements: FH, where the truck engine does it through a power take-off (PTO), and SH, where a separate small diesel engine sits behind the cab and does nothing else. The choice changes the weight you carry, the engines you maintain and the fuel you can account for.
How each one drives the drum
The drum itself is driven the same way on both: a hydraulic pump feeds a hydraulic motor, and the motor turns the drum through a two-stage planetary gearbox. Reverse the flow of oil and the drum turns the other way to discharge. The difference is only in what turns the pump.
FH: front haul, PTO drive
The pump is driven from the truck engine. The power take-off is mounted on the flywheel housing, gear driven and permanently engaged, so the drum can turn whenever the truck engine is running, moving or parked.
SH: slave haul, drum engine
The pump is driven by its own air-cooled diesel engine of 52 kW or 79 kW, mounted between the cab and the drum. The drum runs independently of the truck.
What the PTO version saves you
- One engine to look after. There is no second engine to fuel, service and find parts for. You deal with the truck and with us, and nobody else.
- Less weight on the chassis. Without the drum engine, its silencer and fittings, the FH mixer body is lighter: about 3.35 tonnes against 3.75 for a 6 m³ drum, and 4.4 against 5.1 for a 10 m³ drum. That is weight you no longer haul on every trip.
- Fuel you can account for. All the fuel goes into one tank and one engine, so consumption per trip is easy to track and losses are easier to spot.
- No water pump to maintain. The FH water tank is pressurized with air from the truck, so there is no separate pump to service.
- Fewer assemblies to repair. With fewer components and fittings behind the cab, the mixer is quicker to put back to work after a repair.
- A shorter, tidier unit. The FH mixer body is also shorter, for example 6,000 mm against 6,200 mm at 6 m³.
When a drum engine still makes sense
The SH version earns its place when the truck cannot supply the drive. The PTO has to be fitted to the truck engine, so the chassis must offer one that suits the drum. If you already own a chassis without a suitable PTO, or you want a drum that keeps turning whatever the truck engine is doing, a drum engine solves it. Our 4 m³ AM 4 SHC is built this way.
Side by side
| FH (PTO drive) | SH (drum engine) | |
|---|---|---|
| What turns the drum | Truck engine, through a PTO | Separate diesel engine, 52 or 79 kW |
| Engines to maintain | One | Two |
| Mixer weight, 6 m³ | About 3.35 t | About 3.75 t |
| Mixer weight, 8 m³ | About 3.95 t | About 4.5 t |
| Mixer weight, 10 m³ | About 4.4 t | About 5.1 t |
| Water system | Air-pressurized tank, no pump | Water tank with pump |
| Needs from the truck | A suitable engine PTO | Space and payload for the drum engine |
Related
- Stetter transit mixers, 4 to 12 m³
- Can a new mixer drum go on the truck you already own? A chassis guide
Not sure which drive suits your truck?
Send us the chassis make, model and wheelbase.