Schwing Stetter Philippines Hardfacing the ROCK Valve: how a worn valve is made new What hardfacing is, when a Schwing ROCK Valve is due for it, and the checks that go with it. A guide for pump owners. Concrete pumps For owners and managers For trained operators and maintenance teams Maintenance Nov 19, 2026
Schwing Stetter Philippines Batching plant safety devices and rules Emergency stops, limit switches, the undervoltage trip and lockout: what each one does on a batching plant, and the incident the rules were written for. Batching plants For owners and managers For trained operators and maintenance teams Safety Nov 19, 2026
Schwing Stetter Philippines How a twin-shaft mixer works Two shafts, one trough: why a twin-shaft mixer is fast and wears in few places, the break-in routine for a new one, and what its symptoms mean. Batching plants For owners and managers For trained operators and maintenance teams How it works Nov 19, 2026
Schwing Stetter Philippines The 51-point weekly batching plant check The manufacturer's weekly walk-around for a batching plant: oil levels, mechanical points and electrical points, with space to mark each one. Batching plants For trained operators and maintenance teams Maintenance Nov 19, 2026
Schwing Stetter Philippines Batching plant lubrication: what goes where Oil grades, quantities and change intervals for the CP 18, CP 30, M1 and twin-shaft mixers, and why the first change comes early. Batching plants For trained operators and maintenance teams Maintenance Nov 19, 2026
Schwing Stetter Philippines Batching plant maintenance by the hour meter The service routine Schwing Stetter teaches plant crews, from the daily clean-out to the 2,000-hour wear checks. Batching plants For owners and managers For trained operators and maintenance teams Maintenance Nov 19, 2026
Schwing Stetter Philippines Concrete pump safety for the crew Setting up, the pipeline, the end hose, blockages and clean-out: the moments where pump accidents happen, and the rule for each. Concrete pumps For trained operators and maintenance teams Safety Nov 18, 2026
Schwing Stetter Philippines A concrete pump maintenance schedule The daily, weekly and by-volume checks Schwing Stetter gives its pump owners, from the water box to the cutting ring. Concrete pumps For owners and managers For trained operators and maintenance teams Maintenance Nov 18, 2026
Schwing Stetter Philippines Cleaning and inspecting a concrete pipeline The pour is not finished until the line is clean. Four ways to empty a delivery line, how to wash out a long line with water, and how to check pipe wall thickness against the pressure your job needs. Concrete pumps For trained operators and maintenance teams Maintenance Nov 17, 2026
Schwing Stetter Philippines How a concrete delivery line is laid and supported Every meter of a delivery line holds 30 kg of concrete under metric tons of force. Where to anchor it, how to support the base line and the riser, which bends to use, and how to feed more than one pour area. Concrete pumps For trained operators and maintenance teams Nov 17, 2026